School Name: Memorial High School
Graduation Advisors: Any Questions / Concerns, please feel free to contact: Mr. Schroeder@ email@example.com
INSTRUCTIONS ON HOW TO SIZE
- Select the finger you want to be measured because the ring will only fit properly on that finger.
- If you need to have your finger measured, please visit your local jeweler or request a finger sizing kit from us.
- Sizing the finger is super simple, see the steps below.
- Do not size your finger too tight, you are looking for a comfortable fit. Not too loose & not too tight.
- If the knuckle is bigger than the back of your finger, please size the ring to fit over the knuckle only*
NOTE-1: Allow for change of weather | Depending on the season – In the winter, your finger contracts (gets smaller) and in the summer, your finger expands (becomes larger).
NOTE-2: Once you come up with a finger size, let’s say a Size 7, go back and try on a 6 ½ and also a 7 ½ to see what feels most “comfortable”. Take some time, maybe 1 day at the most to see which size feels right. Please remember, these rings are custom and cannot be returned or sized up or down once you select a size.
IF YOU DO NOT KNOW YOUR SIZE OR WANT TO DOUBLE CHECK CONTACT US FOR A FREE DISPOSABLE PLASTIC RING SIZER
|4’9″ to 4’11”||42||over 135 lbs.|
|5’0″ to 5’2″||45||over 165 lbs.|
|5’3″ to 5’5″||48||over 195 lbs.|
|5’6″ to 5’8″||51||over 250 lbs.|
|5’9″ to 5’11”||54||over 275 lbs.|
|6’0″ to 6’2″||57||over 300 lbs.|
|6’3″ to 6’5″||60||over 325 lbs.|
|6’6″ to 6’8″||63||over 350 lbs.|
Sizing the Gown:
Gowns are cut so they fall 8 to 10 inches from the floor. If a longer gown or sleeve length is desired, order one size larger than what would be normal for your height. Be sure to measure the student’s height with the shoes they will wear for the ceremony. The size listed is the actual length of the gown from the back neck to the hem.
Do you need a full fit gown?
Regular size gowns have a fair amount of extra fabric and are sized to look good on those with slender to moderately heavy builds. We recommend the full fit gown if the student’s weight is over the range shown for their height. Young men who are broad-shouldered may also find that they need the “full fit” gown even if their weight is not over that shown on the chart.
Caps are not sized:
The caps have small elastic panels on the sides which allow them to work with almost any head size. We do not require a head measurement, only a gown size. If you have an unusually large head, write a note for us in the checkout area giving us your head measurement so that we can accomodate you!
You can get the majority of the wrinkles out of your gown by putting it in the dryer on the lowest heat setting and putting a damp towel in with it. Run it for about 15 minutes. (Don’t OVER dry, or it will be full of static!) This will remove most of the wrinkles. If it needs to be ironed, use the lowest heat setting on your iron, which is usually called “synthetics” or “polyester.” Test a small area first inside a seam to be sure that the iron is not too hot; an iron that is too hot will melt the fabric. We have had best results by ironing from the inside of the gown.
The apparel is 100% woven polyester fabric, which is washable. We’ve washed these gowns ourselves with no problems, and the feedback from customers on the durability and washability has been very positive. We recommend that you hand wash in cool water and hang to dry. The caps, because they contain a plastic insert rather than cardboard, can be handwashed and line-dried, but it is difficult to get them looking good after washing, since they can’t be ironed. We don’t recommend washing the caps.